The Installation of Inverter With Auto Charger

The Installation of Inverter With Auto Charger
1. Make sure SWITCHES OFF
2. Prepare the red battery cable or the supplied positive in inverter package
3. Connect the battery cable is colored RED or positive, the other end to the Positive Pole of the inverter and the other end to battery positive pole, of the inverter there are positive signs from the terminal battery and there is also a sign of POSITIVE
4. Once attached the red battery cable then tighten the bolt
5. Prepare the battery cable or colored BLACK NEGATIVE already provided in inverter package
6. . Connect the battery cables or colored BLACK NEGATIVE, NEGATIVE Edge Pole from one to the inverter and the other end to the NEGATIVE battery poles, there are signs of the inverter and the battery terminal Negative signs Negative
7. Connect the black wire to the inverter input socket on the inverter
8. Plug the black cable input of the inverter to power outlet
9. Turn on the SWITCH to the ON position
10. Wait for 1 minute for outgoing voltage stable
11. plug loads such as PC computers, lights, etc.